Held in September. Kits provided by the pack.
Scouts shape, build and paint/decorate wooden trimaran boats and race them by blowing through straws to propel them along a water-filled rain gutter.
Boat width maximum: 3 1/4"
(No wider than the plastic form provided)
Boat length maximum: 7"
Sail placement note: Sails that are too low may brush
against the side of the gutter, but should not be so high as to throw off the balance.
(Consider testing it at home in water for balance and seaworthiness!)
Cannot use boats built in previous years.
Must use the parts from the kit.
Decorative detailsare permissible as long as these details do not exceed the maximum length and width specifications.
Boats may not be touched once placed in the water.
Held in March. Kits provided by the pack.
Scouts cut, build and paint/decorate small wooden cars and race them down a metal track.
Car width maximum: 2 3/4"
Car length maximum: 7"
Car weight maximum: 5oz
Car height maximum: 5"
Width between wheels: 1 3/4"
Bottom clearance between car and track: 3/8"
Cannot use cars built in previous years.
Wheel bearings, washers, and bushings are prohibited.
The car shall not ride on springs.
Only official Cub Scout Grand Prix Pinewood Derby wheels and axles are permitted.
Only dry lubricant (e.g. graphite) is permitted.
Decorative details, such as steering wheel and driver are permissible as long as these details do not exceed the maximum length, width, weight and height specifications.
The car must be free-wheeling, with no starting devices.
Each car must pass inspection by the official inspection committee before it may compete.
If, at registration, a car does not pass inspection, the owner will be informed of the reason for failure, and will be given time within the official weigh-in time period to make the adjustment.
After final approval, cars will not be re-inspected unless the car is damaged in handling or in a race.